Janssen Auth Server Configuration Properties#
| Property Name | Description | |
|---|---|---|
| accessTokenLifetime | The lifetime of the short lived Access Token | Details |
| accessTokenSigningAlgValuesSupported | A list of the JWS signing algorithms (alg values) supported by the OP for the access token to encode the Claims in a JWT | Details |
| activeSessionAuthorizationScope | Authorization Scope for active session | Details |
| agamaConfiguration | Engine Config which offers an alternative way to build authentication flows in Janssen server | Details |
| allowAllValueForRevokeEndpoint | Boolean value true allow all value for revoke endpoint | Details |
| allowBlankValuesInDiscoveryResponse | Boolean value specifying whether to allow blank values in discovery response | Details |
| allowEndSessionWithUnmatchedSid | default value false. If true, sid check will be skipped | Details |
| allowIdTokenWithoutImplicitGrantType | Specifies if a token without implicit grant types is allowed | Details |
| allowPostLogoutRedirectWithoutValidation | Allows post-logout redirect without validation for the End Session endpoint (still AS validates it against clientWhiteList url pattern property) | Details |
| allowSpontaneousScopes | Specifies whether to allow spontaneous scopes | Details |
| authenticationFilters | This list details filters for user authentication | Details |
| authenticationFiltersEnabled | Boolean value specifying whether to enable user authentication filters | Details |
| authenticationProtectionConfiguration | Authentication Brute Force Protection Configuration | Details |
| authorizationCodeLifetime | The lifetime of the Authorization Code | Details |
| authorizationEncryptionAlgValuesSupported | List of authorization encryption algorithms supported by this OP | Details |
| authorizationEncryptionEncValuesSupported | A list of the authorization encryption algorithms supported | Details |
| authorizationEndpoint | The authorization endpoint URL | Details |
| authorizationRequestCustomAllowedParameters | This list details the allowed custom parameters for authorization requests | Details |
| authorizationSigningAlgValuesSupported | List of authorization signing algorithms supported by this OP | Details |
| backchannelAuthenticationEndpoint | Backchannel Authentication Endpoint | Details |
| backchannelAuthenticationRequestSigningAlgValuesSupported | Backchannel Authentication Request Signing Alg Values Supported | Details |
| backchannelAuthenticationResponseExpiresIn | Backchannel Authentication Response Expires In | Details |
| backchannelAuthenticationResponseInterval | Backchannel Authentication Response Interval | Details |
| backchannelBindingMessagePattern | Backchannel Binding Message Pattern | Details |
| backchannelClientId | Backchannel Client Id | Details |
| backchannelDeviceRegistrationEndpoint | Backchannel Device Registration Endpoint | Details |
| backchannelLoginHintClaims | Backchannel Login Hint Claims | Details |
| backchannelRedirectUri | Backchannel Redirect Uri | Details |
| backchannelRequestsProcessorJobChunkSize | Each backchannel request processor iteration fetches chunk of data to be processed | Details |
| backchannelRequestsProcessorJobIntervalSec | Specifies the allowable elapsed time in seconds backchannel request processor executes | Details |
| backchannelTokenDeliveryModesSupported | Backchannel Token Delivery Modes Supported | Details |
| backchannelUserCodeParameterSupported | Backchannel User Code Parameter Supported | Details |
| baseEndpoint | The base URL for endpoints | Details |
| blockWebviewAuthorizationEnabled | Enable/Disable block authorizations that originate from Webview (Mobile apps). | Details |
| changeSessionIdOnAuthentication | Boolean value specifying whether change session_id on authentication. Default value is true | Details |
| checkSessionIFrame | URL for an OP IFrame that supports cross-origin communications for session state information with the RP Client using the HTML5 postMessage API | Details |
| checkUserPresenceOnRefreshToken | Check whether user exists and is active before creating RefreshToken. Set it to true if check is needed(Default value is false - don't check. | Details |
| cibaEndUserNotificationConfig | CIBA End User Notification Config | Details |
| cibaGrantLifeExtraTimeSec | Specifies the CIBA Grant life extra time in seconds | Details |
| cibaMaxExpirationTimeAllowedSec | Specifies the CIBA token expiration time in seconds | Details |
| claimsLocalesSupported | This list details the languages and scripts supported for values in the claims being returned | Details |
| claimsParameterSupported | Specifies whether the OP supports use of the claims parameter | Details |
| claimTypesSupported | A list of the Claim Types that the OpenID Provider supports | Details |
| cleanServiceBatchChunkSize | Clean service chunk size which is used during clean up | Details |
| cleanServiceInterval | Time interval for the Clean Service in seconds | Details |
| clientAuthenticationFilters | This list details filters for client authentication | Details |
| clientAuthenticationFiltersEnabled | Boolean value specifying whether to enable client authentication filters | Details |
| clientBlackList | This list specified which client redirection URIs are black-listed | Details |
| clientInfoEndpoint | The Client Info endpoint URL | Details |
| clientRegDefaultToCodeFlowWithRefresh | Boolean value specifying whether to add Authorization Code Flow with Refresh grant during client registratio | Details |
| clientWhiteList | This list specifies which client redirection URIs are white-listed | Details |
| configurationUpdateInterval | The interval for configuration update in seconds | Details |
| consentGatheringScriptBackwardCompatibility | Boolean value specifying whether to turn on Consent Gathering Script backward compatibility mode. If true AS will pick up script with higher level globally. If false (default) AS will pick up script based on client configuration | Details |
| cookieDomain | Sets cookie domain for all cookies created by OP | Details |
| corsConfigurationFilters | This list specifies the CORS configuration filters | Details |
| cssLocation | The location for CSS files | Details |
| customHeadersWithAuthorizationResponse | Choose whether to enable the custom response header parameter to return custom headers with the authorization response | Details |
| dateFormatterPatterns | List of key value date formatters, e.g. 'userinfo: 'yyyy-MM-dd', etc. | Details |
| dcrAuthorizationWithClientCredentials | Boolean value indicating if DCR authorization to be performed using client credentials | Details |
| dcrAuthorizationWithMTLS | Boolean value indicating if DCR authorization allowed with MTLS | Details |
| dcrForbidExpirationTimeInRequest | Boolean value specifying whether to allow to set client's expiration time in seconds during dynamic registration. | Details |
| dcrSignatureValidationEnabled | Boolean value enables DCR signature validation. Default is false | Details |
| dcrSignatureValidationJwks | Specifies JWKS for all DCR's validations | Details |
| dcrSignatureValidationJwksUri | Specifies JWKS URI for all DCR's validations | Details |
| dcrSignatureValidationSharedSecret | Specifies shared secret for Dynamic Client Registration | Details |
| dcrSignatureValidationSoftwareStatementJwksClaim | Specifies claim name inside software statement. Value of claim should point to inlined JWKS | Details |
| dcrSignatureValidationSoftwareStatementJwksURIClaim | Specifies claim name inside software statement. Value of claim should point to JWKS URI | Details |
| dcrSsaValidationConfigs | DCR SSA Validation configurations used to perform validation of SSA or DCR | Details |
| defaultSignatureAlgorithm | The default signature algorithm to sign ID Tokens | Details |
| defaultSubjectType | The default subject type used for dynamic client registration | Details |
| deviceAuthzAcr | Device authz acr | Details |
| deviceAuthzEndpoint | URL for the Device Authorization | Details |
| deviceAuthzRequestExpiresIn | Expiration time given for device authorization requests | Details |
| deviceAuthzResponseTypeToProcessAuthz | Response type used to process device authz requests | Details |
| deviceAuthzTokenPollInterval | Default interval returned to the client to process device token requests | Details |
| disableAuthnForMaxAgeZero | Boolean value specifying whether to disable authentication when max_age=0 | Details |
| disableJdkLogger | Choose whether to disable JDK loggers | Details |
| disablePromptConsent | Boolean value specifying whether to disable prompt=consent | Details |
| disablePromptLogin | Boolean value specifying whether to disable prompt=login | Details |
| disableU2fEndpoint | Choose whether to disable U2F endpoints | Details |
| discoveryAllowedKeys | List of configuration response claim allowed to be displayed in discovery endpoint | Details |
| discoveryCacheLifetimeInMinutes | Lifetime of discovery cache | Details |
| discoveryDenyKeys | List of configuration response claims which must not be displayed in discovery endpoint response | Details |
| displayValuesSupported | A list of the display parameter values that the OpenID Provider supports | Details |
| dnName | DN of certificate issuer | Details |
| dpopJtiCacheTime | Demonstration of Proof-of-Possession (DPoP) cache time | Details |
| dpopNonceCacheTime | Demonstration of Proof-of-Possession (DPoP) nonce cache time | Details |
| dpopSigningAlgValuesSupported | Demonstration of Proof-of-Possession (DPoP) authorization signing algorithms supported | Details |
| dpopTimeframe | Demonstration of Proof-of-Possession (DPoP) timeout | Details |
| dpopUseNonce | Demonstration of Proof-of-Possession (DPoP) use nonce | Details |
| grantTypesSupportedByDynamicRegistration | This list details which OAuth 2.0 grant types can be set up with the client registration API | Details |
| dynamicRegistrationAllowedPasswordGrantScopes | List of grant scopes for dynamic registration | Details |
| dynamicRegistrationCustomAttributes | This list details the custom attributes allowed for dynamic registration | Details |
| dynamicRegistrationCustomObjectClass | LDAP custom object class for dynamic registration | Details |
| dynamicRegistrationDefaultCustomAttributes | This map provides default custom attributes with values for dynamic registration | Details |
| dynamicRegistrationExpirationTime | Expiration time in seconds for clients created with dynamic registration, 0 or -1 means never expire | Details |
| dynamicRegistrationPasswordGrantTypeEnabled | Boolean value specifying whether to enable Password Grant Type during Dynamic Registration | Details |
| dynamicRegistrationPersistClientAuthorizations | Boolean value specifying whether to persist client authorizations | Details |
| dynamicRegistrationScopesParamEnabled | Boolean value specifying whether to enable scopes parameter in dynamic registration | Details |
| enableClientGrantTypeUpdate | Choose if client can update Grant Type values | Details |
| enabledOAuthAuditLogging | enable OAuth Audit Logging | Details |
| endSessionEndpoint | URL at the OP to which an RP can perform a redirect to request that the end user be logged out at the OP | Details |
| endSessionWithAccessToken | Choose whether to accept access tokens to call end_session endpoint | Details |
| errorHandlingMethod | A list of possible error handling methods. Possible values: remote (send error back to RP), internal (show error page) | Details |
| errorReasonEnabled | Boolean value specifying whether to return detailed reason of the error from AS. Default value is false | Details |
| expirationNotificatorEnabled | Boolean value specifying whether expiration notificator is enabled (used to identify expiration for persistence that support TTL, like Couchbase) | Details |
| expirationNotificatorIntervalInSeconds | The expiration notificator interval in second | Details |
| expirationNotificatorMapSizeLimit | The expiration notificator maximum size limit | Details |
| externalLoggerConfiguration | The path to the external log4j2 logging configuration | Details |
| externalUriWhiteList | This list specifies which external URIs can be called by AS (if empty any URI can be called) | Details |
| fapiCompatibility | Boolean value specifying whether to turn on FAPI compatibility mode. If true AS behaves in more strict mode | Details |
| featureFlags | List of enabled feature flags | Details |
| forceIdTokenHintPrecense | Boolean value specifying whether force id_token_hint parameter presence | Details |
| forceOfflineAccessScopeToEnableRefreshToken | Boolean value specifying whether force offline_access scope to enable refresh_token grant type. Default value is true | Details |
| forceSignedRequestObject | Boolean value true indicates that signed request object is mandatory | Details |
| frontChannelLogoutSessionSupported | Choose whether to support front channel session logout | Details |
| grantTypesAndResponseTypesAutofixEnabled | Boolean value specifying whether to Grant types and Response types can be auto fixed | Details |
| grantTypesSupported | This list details which OAuth 2.0 grant types are supported by this OP | Details |
| httpLoggingEnabled | Enable/disable request/response logging filter | Details |
| httpLoggingExcludePaths | This list details the base URIs for which the request/response logging filter will not record activity | Details |
| httpLoggingResponseBodyContent | Defines if Response body will be logged. Default value is false | Details |
| idGenerationEndpoint | ID Generation endpoint URL | Details |
| idTokenEncryptionAlgValuesSupported | A list of the JWE encryption algorithms (alg values) supported by the OP for the ID Token to encode the Claims in a JWT | Details |
| idTokenEncryptionEncValuesSupported | A list of the JWE encryption algorithms (enc values) supported by the OP for the ID Token to encode the Claims in a JWT | Details |
| idTokenFilterClaimsBasedOnAccessToken | Boolean value specifying whether idToken filters claims based on accessToken | Details |
| idTokenLifetime | The lifetime of the ID Token | Details |
| idTokenSigningAlgValuesSupported | A list of the JWS signing algorithms (alg values) supported by the OP for the ID Token to encode the Claims in a JWT | Details |
| idTokenTokenBindingCnfValuesSupported | Array containing a list of the JWT Confirmation Method member names supported by the OP for Token Binding of ID Tokens. The presence of this parameter indicates that the OpenID Provider supports Token Binding of ID Tokens. If omitted, the default is that the OpenID Provider does not support Token Binding of ID Tokens | Details |
| imgLocation | The location for image files | Details |
| includeSidInResponse | Boolean value specifying whether to include sessionId in response | Details |
| introspectionAccessTokenMustHaveIntrospectionScope | If True, rejects introspection requests if access_token does not have the 'introspection' scope in its authorization header. Comparing to 'uma_protection', 'introspection' scope is not allowed for dynamic registration' | Details |
| introspectionAccessTokenMustHaveUmaProtectionScope | If True, rejects introspection requests if access_token does not have the uma_protection scope in its authorization header | Details |
| introspectionEndpoint | Introspection endpoint URL | Details |
| introspectionResponseScopesBackwardCompatibility | Boolean value specifying introspection response backward compatibility mode | Details |
| introspectionScriptBackwardCompatibility | Boolean value specifying whether switch off client's introspection scripts (true value) and run all scripts that exists on server. Default value is false | Details |
| introspectionSkipAuthorization | Specifies if authorization to be skipped for introspection | Details |
| invalidateSessionCookiesAfterAuthorizationFlow | Boolean value to specify whether to invalidate session_id and consent_session_id cookies right after successful or unsuccessful authorization | Details |
| issuer | URL using the https scheme that OP asserts as Issuer identifier | Details |
| jansId | URL for the Inum generator Service | Details |
| jansOpenIdConnectVersion | OpenID Connect Version | Details |
| jmsBrokerURISet | JMS Broker URI Set | Details |
| jmsPassword | JMS Password | Details |
| jmsUserName | JMS UserName | Details |
| jsLocation | The location for JavaScript files | Details |
| jwksAlgorithmsSupported | A list of algorithms that will be used in JWKS endpoint | Details |
| jwksUri | URL of the OP's JSON Web Key Set (JWK) document. This contains the signing key(s) the RP uses to validate signatures from the OP | Details |
| keepAuthenticatorAttributesOnAcrChange | Boolean value specifying whether to keep authenticator attributes on ACR change | Details |
| keyAlgsAllowedForGeneration | List of algorithm allowed to be used for key generation | Details |
| keyRegenerationEnabled | Boolean value specifying whether to regenerate keys | Details |
| keyRegenerationInterval | The interval for key regeneration in hours | Details |
| keySelectionStrategy | Key Selection Strategy : OLDER, NEWER, FIRST | Details |
| keySignWithSameKeyButDiffAlg | Specifies if signing to be done with same key but apply different algorithms | Details |
| keyStoreFile | The Key Store File (JKS) | Details |
| keyStoreSecret | The Key Store password | Details |
| legacyIdTokenClaims | Choose whether to include claims in ID tokens | Details |
| logClientIdOnClientAuthentication | Choose if application should log the Client ID on client authentication | Details |
| logClientNameOnClientAuthentication | Choose if application should log the Client Name on client authentication | Details |
| loggingLayout | Logging layout used for Jans Authorization Server loggers | Details |
| loggingLevel | Specify the logging level of loggers | Details |
| logNotFoundEntityAsError | Boolean value specifying whether to log not_found entity exception as error or as trace. Default value is false (trace). | Details |
| metricReporterInterval | The interval for metric reporter in seconds | Details |
| metricReporterKeepDataDays | The days to keep metric reported data | Details |
| mtlsAuthorizationEndpoint | URL for Mutual TLS (mTLS) Client Authentication and Certificate-Bound Access Tokens (MTLS) Endpoint | Details |
| mtlsCheckSessionIFrame | URL for Mutual TLS (mTLS) IFrame that supports cross-origin communications for session state information with the RP Client using the HTML5 postMessage API | Details |
| mtlsClientInfoEndpoint | URL for Mutual TLS (mTLS) Client Info endpoint | Details |
| mtlsDeviceAuthzEndpoint | Mutual TLS (mTLS) device authorization endpoint URL | Details |
| mtlsEndSessionEndpoint | URL for Mutual TLS (mTLS) to which an RP can perform a redirect to request that the end user be logged out at the OP | Details |
| mtlsIdGenerationEndpoint | Mutual TLS (mTLS) ID generation endpoint URL | Details |
| mtlsIntrospectionEndpoint | Mutual TLS (mTLS) introspection endpoint URL | Details |
| mtlsJwksUri | URL for Mutual TLS (mTLS) of the OP's JSON Web Key Set (JWK) document | Details |
| mtlsParEndpoint | Mutual TLS (mTLS) Pushed Authorization Requests(PAR) endpoint URL | Details |
| mtlsRegistrationEndpoint | Mutual TLS (mTLS) registration endpoint URL | Details |
| mtlsTokenEndpoint | URL for Mutual TLS (mTLS) Authorization token Endpoint | Details |
| mtlsTokenRevocationEndpoint | URL for Mutual TLS (mTLS) Authorization token revocation endpoint | Details |
| mtlsUserInfoEndpoint | Mutual TLS (mTLS) user info endpoint URL | Details |
| openIdConfigurationEndpoint | URL for the Open ID Connect Configuration Endpoint | Details |
| openIdDiscoveryEndpoint | Discovery endpoint URL | Details |
| openidScopeBackwardCompatibility | Set to false to only allow token endpoint request for openid scope with grant type equals to authorization_code, restrict access to userinfo to scope openid and only return id_token if scope contains openid | Details |
| openidSubAttribute | Specifies which LDAP attribute is used for the subject identifier claim | Details |
| opPolicyUri | URL that the OpenID Provider provides to the person registering the Client to read about the OP's requirements on how the Relying Party can use the data provided by the OP | Details |
| opTosUri | URL that the OpenID Provider provides to the person registering the Client to read about OpenID Provider's terms of service | Details |
| pairwiseCalculationKey | Key to calculate algorithmic pairwise IDs | Details |
| pairwiseCalculationSalt | Salt to calculate algorithmic pairwise IDs | Details |
| pairwiseIdType | the pairwise ID type | Details |
| parEndpoint | URL for Pushed Authorisation Request (PAR) Endpoint | Details |
| persistIdToken | Specifies whether to persist id_token (otherwise saves into cache) | Details |
| persistRefreshToken | Specifies whether to persist refresh_token (otherwise saves into cache) | Details |
| personCustomObjectClassList | This list details LDAP custom object classes for dynamic person enrollment | Details |
| publicSubjectIdentifierPerClientEnabled | Specifies whether public subject identifier is allowed per client | Details |
| redirectUrisRegexEnabled | Enable/Disable redirect uris validation using regular expression | Details |
| refreshTokenExtendLifetimeOnRotation | Boolean value specifying whether to extend refresh tokens on rotation | Details |
| refreshTokenLifetime | The lifetime of the Refresh Token | Details |
| registrationEndpoint | Registration endpoint URL | Details |
| rejectEndSessionIfIdTokenExpired | default value false. If true and id_token is not found in db, request is rejected | Details |
| rejectJwtWithNoneAlg | Boolean value specifying whether reject JWT requested or validated with algorithm None. Default value is true | Details |
| removeRefreshTokensForClientOnLogout | Boolean value specifying whether to remove Refresh Tokens on logout. Default value is true | Details |
| requestObjectEncryptionAlgValuesSupported | A list of the JWE encryption algorithms (alg values) supported by the OP for Request Objects | Details |
| requestObjectEncryptionEncValuesSupported | A list of the JWE encryption algorithms (enc values) supported by the OP for Request Objects | Details |
| requestObjectSigningAlgValuesSupported | A list of the JWS signing algorithms (alg values) supported by the OP for Request Objects | Details |
| requestParameterSupported | Boolean value specifying whether the OP supports use of the request parameter | Details |
| requestUriBlockList | Block list for requestUri that can come to Authorization Endpoint (e.g. localhost) | Details |
| requestUriHashVerificationEnabled | Boolean value specifying whether the OP supports use of the request_uri hash verification | Details |
| requestUriParameterSupported | Boolean value specifying whether the OP supports use of the request_uri parameter | Details |
| requirePar | Boolean value to indicate of Pushed Authorisation Request(PAR)is required | Details |
| requirePkce | Boolean value true check for Proof Key for Code Exchange (PKCE) | Details |
| requireRequestObjectEncryption | Boolean value true encrypts request object | Details |
| requireRequestUriRegistration | Boolean value specifying whether the OP requires any request_uri values used to be pre-registered using the request_uris registration parameter | Details |
| responseModesSupported | This list details which OAuth 2.0 response modes are supported by this OP | Details |
| responseTypesSupported | This list details which OAuth 2.0 response_type values are supported by this OP. | Details |
| returnClientSecretOnRead | Boolean value specifying whether a client_secret is returned on client GET or PUT. Set to true by default which means to return secret | Details |
| returnDeviceSecretFromAuthzEndpoint | Details | |
| rotateClientRegistrationAccessTokenOnUsage | Boolean value specifying whether to rotate client registration access token after each usage | Details |
| rotateDeviceSecret | Details | |
| sectorIdentifierCacheLifetimeInMinutes | Sector Identifier cache lifetime in minutes | Details |
| serverSessionIdLifetime | Dedicated property to control lifetime of the server side OP session object in seconds. Overrides sessionIdLifetime. By default value is 0, so object lifetime equals sessionIdLifetime (which sets both cookie and object expiration). It can be useful if goal is to keep different values for client cookie and server object | Details |
| serviceDocumentation | URL of a page containing human-readable information that developers might want or need to know when using the OpenID Provider | Details |
| sessionIdLifetime | The lifetime of session id in seconds. If 0 or -1 then expiration is not set. session_id cookie expires when browser session ends | Details |
| sessionIdPersistInCache | Boolean value specifying whether to persist session_id in cache | Details |
| sessionIdPersistOnPromptNone | Boolean value specifying whether to persist session ID on prompt none | Details |
| sessionIdRequestParameterEnabled | Boolean value specifying whether to enable session_id HTTP request parameter | Details |
| sessionIdUnauthenticatedUnusedLifetime | The lifetime for unused unauthenticated session states | Details |
| sessionIdUnusedLifetime | The lifetime for unused session states | Details |
| shareSubjectIdBetweenClientsWithSameSectorId | When true, clients with the same Sector ID also share the same Subject ID | Details |
| skipAuthenticationFilterOptionsMethod | Force Authentication Filtker to process OPTIONS request | Details |
| skipAuthorizationForOpenIdScopeAndPairwiseId | Choose whether to skip authorization if a client has an OpenId scope and a pairwise ID | Details |
| skipRefreshTokenDuringRefreshing | Boolean value specifying whether to skip refreshing tokens on refreshing | Details |
| softwareStatementValidationClaimName | Validation claim name for software statement | Details |
| softwareStatementValidationType | Validation type used for software statement | Details |
| spontaneousScopeLifetime | The lifetime of spontaneous scope in seconds | Details |
| ssaConfiguration | SSA Configuration | Details |
| statAuthorizationScope | Scope required for Statistical Authorization | Details |
| staticDecryptionKid | Specifies static decryption Kid | Details |
| staticKid | Specifies static Kid | Details |
| statTimerIntervalInSeconds | Statistical data capture time interval | Details |
| subjectIdentifiersPerClientSupported | A list of the subject identifiers supported per client | Details |
| subjectTypesSupported | This list details which Subject Identifier types that the OP supports. Valid types include pairwise and public. | Details |
| tokenEndpoint | The token endpoint URL | Details |
| tokenEndpointAuthMethodsSupported | A list of Client Authentication methods supported by this Token Endpoint | Details |
| tokenEndpointAuthSigningAlgValuesSupported | A list of the JWS signing algorithms (alg values) supported by the Token Endpoint for the signature on the JWT used to authenticate the Client at the Token Endpoint for the private_key_jwt and client_secret_jwt authentication methods | Details |
| tokenRevocationEndpoint | The URL for the access_token or refresh_token revocation endpoint | Details |
| trustedClientEnabled | Boolean value specifying whether a client is trusted and no authorization is required | Details |
| trustedSsaIssuers | List of trusted SSA issuers with configuration (e.g. automatically granted scopes). | Details |
| uiLocalesSupported | This list details the languages and scripts supported for the user interface | Details |
| umaAddScopesAutomatically | Add UMA scopes automatically if it is not registered yet | Details |
| umaConfigurationEndpoint | UMA Configuration endpoint URL | Details |
| umaGrantAccessIfNoPolicies | Specify whether to grant access to resources if there is no any policies associated with scopes | Details |
| umaPctLifetime | UMA PCT lifetime | Details |
| umaResourceLifetime | UMA Resource lifetime | Details |
| umaRestrictResourceToAssociatedClient | Restrict access to resource by associated client | Details |
| umaRptAsJwt | Issue RPT as JWT or as random string | Details |
| umaRptLifetime | UMA RPT lifetime | Details |
| umaTicketLifetime | UMA ticket lifetime | Details |
| umaValidateClaimToken | Validate claim_token as id_token assuming it is issued by local id | Details |
| updateClientAccessTime | Choose if application should update oxLastAccessTime/oxLastLogonTime attributes upon client authentication | Details |
| updateUserLastLogonTime | Choose if application should update oxLastLogonTime attribute upon user authentication | Details |
| useHighestLevelScriptIfAcrScriptNotFound | Enable/Disable usage of highest level script in case ACR script does not exist | Details |
| useLocalCache | Cache in local memory cache attributes, scopes, clients and organization entry with expiration 60 seconds | Details |
| useNestedJwtDuringEncryption | Boolean value specifying whether to use nested Jwt during encryption | Details |
| userInfoEncryptionAlgValuesSupported | This JSON Array lists which JWS encryption algorithms (alg values) [JWA] can be used by for the UserInfo endpoint to encode the claims in a JWT | Details |
| userInfoEncryptionEncValuesSupported | This JSON Array lists which JWS encryption algorithms (enc values) [JWA] can be used by for the UserInfo endpoint to encode the claims in a JWT | Details |
| userInfoEndpoint | The User Info endpoint URL | Details |
| userInfoSigningAlgValuesSupported | This JSON Array lists which JWS signing algorithms (alg values) [JWA] can be used by for the UserInfo endpoint to encode the claims in a JWT | Details |
| webKeysStorage | Web Key Storage Type | Details |
accessTokenLifetime#
-
Description: The lifetime of the short lived Access Token
-
Required: No
-
Default value: None
accessTokenSigningAlgValuesSupported#
-
Description: A list of the JWS signing algorithms (alg values) supported by the OP for the access token to encode the Claims in a JWT
-
Required: No
-
Default value: None
activeSessionAuthorizationScope#
-
Description: Authorization Scope for active session
-
Required: No
-
Default value: None
agamaConfiguration#
-
Description: Engine Config which offers an alternative way to build authentication flows in Janssen server
-
Required: No
-
Default value: None
allowAllValueForRevokeEndpoint#
-
Description: Boolean value true allow all value for revoke endpoint
-
Required: No
-
Default value: false
allowBlankValuesInDiscoveryResponse#
-
Description: Boolean value specifying whether to allow blank values in discovery response
-
Required: No
-
Default value: false
allowEndSessionWithUnmatchedSid#
-
Description: default value false. If true, sid check will be skipped
-
Required: No
-
Default value: false
allowIdTokenWithoutImplicitGrantType#
-
Description: Specifies if a token without implicit grant types is allowed
-
Required: No
-
Default value: None
allowPostLogoutRedirectWithoutValidation#
-
Description: Allows post-logout redirect without validation for the End Session endpoint (still AS validates it against clientWhiteList url pattern property)
-
Required: No
-
Default value: false
allowSpontaneousScopes#
-
Description: Specifies whether to allow spontaneous scopes
-
Required: No
-
Default value: None
authenticationFilters#
-
Description: This list details filters for user authentication
-
Required: No
-
Default value: None
authenticationFiltersEnabled#
-
Description: Boolean value specifying whether to enable user authentication filters
-
Required: No
-
Default value: None
authenticationProtectionConfiguration#
-
Description: Authentication Brute Force Protection Configuration
-
Required: No
-
Default value: None
authorizationCodeLifetime#
-
Description: The lifetime of the Authorization Code
-
Required: No
-
Default value: None
authorizationEncryptionAlgValuesSupported#
-
Description: List of authorization encryption algorithms supported by this OP
-
Required: No
-
Default value: None
authorizationEncryptionEncValuesSupported#
-
Description: A list of the authorization encryption algorithms supported
-
Required: No
-
Default value: None
authorizationEndpoint#
-
Description: The authorization endpoint URL
-
Required: No
-
Default value: None
authorizationRequestCustomAllowedParameters#
-
Description: This list details the allowed custom parameters for authorization requests
-
Required: No
-
Default value: None
authorizationSigningAlgValuesSupported#
-
Description: List of authorization signing algorithms supported by this OP
-
Required: No
-
Default value: None
backchannelAuthenticationEndpoint#
-
Description: Backchannel Authentication Endpoint
-
Required: No
-
Default value: None
backchannelAuthenticationRequestSigningAlgValuesSupported#
-
Description: Backchannel Authentication Request Signing Alg Values Supported
-
Required: No
-
Default value: None
backchannelAuthenticationResponseExpiresIn#
-
Description: Backchannel Authentication Response Expires In
-
Required: No
-
Default value: None
backchannelAuthenticationResponseInterval#
-
Description: Backchannel Authentication Response Interval
-
Required: No
-
Default value: None
backchannelBindingMessagePattern#
-
Description: Backchannel Binding Message Pattern
-
Required: No
-
Default value: None
backchannelClientId#
-
Description: Backchannel Client Id
-
Required: No
-
Default value: None
backchannelDeviceRegistrationEndpoint#
-
Description: Backchannel Device Registration Endpoint
-
Required: No
-
Default value: None
backchannelLoginHintClaims#
-
Description: Backchannel Login Hint Claims
-
Required: No
-
Default value: None
backchannelRedirectUri#
-
Description: Backchannel Redirect Uri
-
Required: No
-
Default value: None
backchannelRequestsProcessorJobChunkSize#
-
Description: Each backchannel request processor iteration fetches chunk of data to be processed
-
Required: No
-
Default value: None
backchannelRequestsProcessorJobIntervalSec#
-
Description: Specifies the allowable elapsed time in seconds backchannel request processor executes
-
Required: No
-
Default value: None
backchannelTokenDeliveryModesSupported#
-
Description: Backchannel Token Delivery Modes Supported
-
Required: No
-
Default value: None
backchannelUserCodeParameterSupported#
-
Description: Backchannel User Code Parameter Supported
-
Required: No
-
Default value: None
baseEndpoint#
-
Description: The base URL for endpoints
-
Required: No
-
Default value: None
blockWebviewAuthorizationEnabled#
-
Description: Enable/Disable block authorizations that originate from Webview (Mobile apps).
-
Required: No
-
Default value: false
changeSessionIdOnAuthentication#
-
Description: Boolean value specifying whether change session_id on authentication. Default value is true
-
Required: No
-
Default value: true
checkSessionIFrame#
-
Description: URL for an OP IFrame that supports cross-origin communications for session state information with the RP Client using the HTML5 postMessage API
-
Required: No
-
Default value: None
checkUserPresenceOnRefreshToken#
-
Description: Check whether user exists and is active before creating RefreshToken. Set it to true if check is needed(Default value is false - don't check.
-
Required: No
-
Default value: false
cibaEndUserNotificationConfig#
-
Description: CIBA End User Notification Config
-
Required: No
-
Default value: None
cibaGrantLifeExtraTimeSec#
-
Description: Specifies the CIBA Grant life extra time in seconds
-
Required: No
-
Default value: None
cibaMaxExpirationTimeAllowedSec#
-
Description: Specifies the CIBA token expiration time in seconds
-
Required: No
-
Default value: None
claimsLocalesSupported#
-
Description: This list details the languages and scripts supported for values in the claims being returned
-
Required: No
-
Default value: None
claimsParameterSupported#
-
Description: Specifies whether the OP supports use of the claims parameter
-
Required: No
-
Default value: None
claimTypesSupported#
-
Description: A list of the Claim Types that the OpenID Provider supports
-
Required: No
-
Default value: None
cleanServiceBatchChunkSize#
-
Description: Clean service chunk size which is used during clean up
-
Required: No
-
Default value: 100
cleanServiceInterval#
-
Description: Time interval for the Clean Service in seconds
-
Required: No
-
Default value: None
clientAuthenticationFilters#
-
Description: This list details filters for client authentication
-
Required: No
-
Default value: None
clientAuthenticationFiltersEnabled#
-
Description: Boolean value specifying whether to enable client authentication filters
-
Required: No
-
Default value: None
clientBlackList#
-
Description: This list specified which client redirection URIs are black-listed
-
Required: No
-
Default value: None
clientInfoEndpoint#
-
Description: The Client Info endpoint URL
-
Required: No
-
Default value: None
clientRegDefaultToCodeFlowWithRefresh#
-
Description: Boolean value specifying whether to add Authorization Code Flow with Refresh grant during client registratio
-
Required: No
-
Default value: None
clientWhiteList#
-
Description: This list specifies which client redirection URIs are white-listed
-
Required: No
-
Default value: None
configurationUpdateInterval#
-
Description: The interval for configuration update in seconds
-
Required: No
-
Default value: None
consentGatheringScriptBackwardCompatibility#
-
Description: Boolean value specifying whether to turn on Consent Gathering Script backward compatibility mode. If true AS will pick up script with higher level globally. If false (default) AS will pick up script based on client configuration
-
Required: No
-
Default value: false
cookieDomain#
-
Description: Sets cookie domain for all cookies created by OP
-
Required: No
-
Default value: None
corsConfigurationFilters#
-
Description: This list specifies the CORS configuration filters
-
Required: No
-
Default value: None
cssLocation#
-
Description: The location for CSS files
-
Required: No
-
Default value: None
customHeadersWithAuthorizationResponse#
-
Description: Choose whether to enable the custom response header parameter to return custom headers with the authorization response
-
Required: No
-
Default value: None
dateFormatterPatterns#
-
Description: List of key value date formatters, e.g. 'userinfo: 'yyyy-MM-dd', etc.
-
Required: No
-
Default value: None
dcrAuthorizationWithClientCredentials#
-
Description: Boolean value indicating if DCR authorization to be performed using client credentials
-
Required: No
-
Default value: false
dcrAuthorizationWithMTLS#
-
Description: Boolean value indicating if DCR authorization allowed with MTLS
-
Required: No
-
Default value: false
dcrForbidExpirationTimeInRequest#
-
Description: Boolean value specifying whether to allow to set client's expiration time in seconds during dynamic registration.
-
Required: No
-
Default value: false
dcrSignatureValidationEnabled#
-
Description: Boolean value enables DCR signature validation. Default is false
-
Required: No
-
Default value: false
dcrSignatureValidationJwks#
-
Description: Specifies JWKS for all DCR's validations
-
Required: No
-
Default value: None
dcrSignatureValidationJwksUri#
-
Description: Specifies JWKS URI for all DCR's validations
-
Required: No
-
Default value: None
dcrSignatureValidationSharedSecret#
-
Description: Specifies shared secret for Dynamic Client Registration
-
Required: No
-
Default value: None
dcrSignatureValidationSoftwareStatementJwksClaim#
-
Description: Specifies claim name inside software statement. Value of claim should point to inlined JWKS
-
Required: No
-
Default value: None
dcrSignatureValidationSoftwareStatementJwksURIClaim#
-
Description: Specifies claim name inside software statement. Value of claim should point to JWKS URI
-
Required: No
-
Default value: None
dcrSsaValidationConfigs#
-
Description: DCR SSA Validation configurations used to perform validation of SSA or DCR
-
Required: No
-
Default value: None
defaultSignatureAlgorithm#
-
Description: The default signature algorithm to sign ID Tokens
-
Required: No
-
Default value: None
defaultSubjectType#
-
Description: The default subject type used for dynamic client registration
-
Required: No
-
Default value: None
deviceAuthzAcr#
-
Description: Device authz acr
-
Required: No
-
Default value: None
deviceAuthzEndpoint#
-
Description: URL for the Device Authorization
-
Required: No
-
Default value: None
deviceAuthzRequestExpiresIn#
-
Description: Expiration time given for device authorization requests
-
Required: No
-
Default value: None
deviceAuthzResponseTypeToProcessAuthz#
-
Description: Response type used to process device authz requests
-
Required: No
-
Default value: None
deviceAuthzTokenPollInterval#
-
Description: Default interval returned to the client to process device token requests
-
Required: No
-
Default value: None
disableAuthnForMaxAgeZero#
-
Description: Boolean value specifying whether to disable authentication when max_age=0
-
Required: No
-
Default value: false
disableJdkLogger#
-
Description: Choose whether to disable JDK loggers
-
Required: No
-
Default value: true
disablePromptConsent#
-
Description: Boolean value specifying whether to disable prompt=consent
-
Required: No
-
Default value: false
disablePromptLogin#
-
Description: Boolean value specifying whether to disable prompt=login
-
Required: No
-
Default value: false
disableU2fEndpoint#
-
Description: Choose whether to disable U2F endpoints
-
Required: No
-
Default value: false
discoveryAllowedKeys#
-
Description: List of configuration response claim allowed to be displayed in discovery endpoint
-
Required: No
-
Default value: None
discoveryCacheLifetimeInMinutes#
-
Description: Lifetime of discovery cache
-
Required: No
-
Default value: 60
discoveryDenyKeys#
-
Description: List of configuration response claims which must not be displayed in discovery endpoint response
-
Required: No
-
Default value: None
displayValuesSupported#
-
Description: A list of the display parameter values that the OpenID Provider supports
-
Required: No
-
Default value: None
dnName#
-
Description: DN of certificate issuer
-
Required: No
-
Default value: None
dpopJtiCacheTime#
-
Description: Demonstration of Proof-of-Possession (DPoP) cache time
-
Required: No
-
Default value: 3600
dpopNonceCacheTime#
-
Description: Demonstration of Proof-of-Possession (DPoP) nonce cache time
-
Required: No
-
Default value: 3600
dpopSigningAlgValuesSupported#
-
Description: Demonstration of Proof-of-Possession (DPoP) authorization signing algorithms supported
-
Required: No
-
Default value: None
dpopTimeframe#
-
Description: Demonstration of Proof-of-Possession (DPoP) timeout
-
Required: No
-
Default value: 5
dpopUseNonce#
-
Description: Demonstration of Proof-of-Possession (DPoP) use nonce
-
Required: No
-
Default value: false
grantTypesSupportedByDynamicRegistration#
-
Description: This list details which OAuth 2.0 grant types can be set up with the client registration API
-
Required: No
-
Default value: None
dynamicRegistrationAllowedPasswordGrantScopes#
-
Description: List of grant scopes for dynamic registration
-
Required: No
-
Default value: None
dynamicRegistrationCustomAttributes#
-
Description: This list details the custom attributes allowed for dynamic registration
-
Required: No
-
Default value: None
dynamicRegistrationCustomObjectClass#
-
Description: LDAP custom object class for dynamic registration
-
Required: No
-
Default value: None
dynamicRegistrationDefaultCustomAttributes#
-
Description: This map provides default custom attributes with values for dynamic registration
-
Required: No
-
Default value: None
dynamicRegistrationExpirationTime#
-
Description: Expiration time in seconds for clients created with dynamic registration, 0 or -1 means never expire
-
Required: No
-
Default value: -1
dynamicRegistrationPasswordGrantTypeEnabled#
-
Description: Boolean value specifying whether to enable Password Grant Type during Dynamic Registration
-
Required: No
-
Default value: false
dynamicRegistrationPersistClientAuthorizations#
-
Description: Boolean value specifying whether to persist client authorizations
-
Required: No
-
Default value: None
dynamicRegistrationScopesParamEnabled#
-
Description: Boolean value specifying whether to enable scopes parameter in dynamic registration
-
Required: No
-
Default value: None
enableClientGrantTypeUpdate#
-
Description: Choose if client can update Grant Type values
-
Required: No
-
Default value: None
enabledOAuthAuditLogging#
-
Description: enable OAuth Audit Logging
-
Required: No
-
Default value: None
endSessionEndpoint#
-
Description: URL at the OP to which an RP can perform a redirect to request that the end user be logged out at the OP
-
Required: No
-
Default value: None
endSessionWithAccessToken#
-
Description: Choose whether to accept access tokens to call end_session endpoint
-
Required: No
-
Default value: None
errorHandlingMethod#
-
Description: A list of possible error handling methods. Possible values: remote (send error back to RP), internal (show error page)
-
Required: No
-
Default value: remote
errorReasonEnabled#
-
Description: Boolean value specifying whether to return detailed reason of the error from AS. Default value is false
-
Required: No
-
Default value: false
expirationNotificatorEnabled#
-
Description: Boolean value specifying whether expiration notificator is enabled (used to identify expiration for persistence that support TTL, like Couchbase)
-
Required: No
-
Default value: false
expirationNotificatorIntervalInSeconds#
-
Description: The expiration notificator interval in second
-
Required: No
-
Default value: None
expirationNotificatorMapSizeLimit#
-
Description: The expiration notificator maximum size limit
-
Required: No
-
Default value: None
externalLoggerConfiguration#
-
Description: The path to the external log4j2 logging configuration
-
Required: No
-
Default value: None
externalUriWhiteList#
-
Description: This list specifies which external URIs can be called by AS (if empty any URI can be called)
-
Required: No
-
Default value: None
fapiCompatibility#
-
Description: Boolean value specifying whether to turn on FAPI compatibility mode. If true AS behaves in more strict mode
-
Required: No
-
Default value: false
featureFlags#
-
Description: List of enabled feature flags
-
Required: No
-
Default value: None
forceIdTokenHintPrecense#
-
Description: Boolean value specifying whether force id_token_hint parameter presence
-
Required: No
-
Default value: false
forceOfflineAccessScopeToEnableRefreshToken#
-
Description: Boolean value specifying whether force offline_access scope to enable refresh_token grant type. Default value is true
-
Required: No
-
Default value: true
forceSignedRequestObject#
-
Description: Boolean value true indicates that signed request object is mandatory
-
Required: No
-
Default value: false
frontChannelLogoutSessionSupported#
-
Description: Choose whether to support front channel session logout
-
Required: No
-
Default value: None
grantTypesAndResponseTypesAutofixEnabled#
-
Description: Boolean value specifying whether to Grant types and Response types can be auto fixed
-
Required: No
-
Default value: None
grantTypesSupported#
-
Description: This list details which OAuth 2.0 grant types are supported by this OP
-
Required: No
-
Default value: None
httpLoggingEnabled#
-
Description: Enable/disable request/response logging filter
-
Required: No
-
Default value: None
httpLoggingExcludePaths#
-
Description: This list details the base URIs for which the request/response logging filter will not record activity
-
Required: No
-
Default value: None
httpLoggingResponseBodyContent#
-
Description: Defines if Response body will be logged. Default value is false
-
Required: No
-
Default value: false
idGenerationEndpoint#
-
Description: ID Generation endpoint URL
-
Required: No
-
Default value: None
idTokenEncryptionAlgValuesSupported#
-
Description: A list of the JWE encryption algorithms (alg values) supported by the OP for the ID Token to encode the Claims in a JWT
-
Required: No
-
Default value: None
idTokenEncryptionEncValuesSupported#
-
Description: A list of the JWE encryption algorithms (enc values) supported by the OP for the ID Token to encode the Claims in a JWT
-
Required: No
-
Default value: None
idTokenFilterClaimsBasedOnAccessToken#
-
Description: Boolean value specifying whether idToken filters claims based on accessToken
-
Required: No
-
Default value: None
idTokenLifetime#
-
Description: The lifetime of the ID Token
-
Required: No
-
Default value: None
idTokenSigningAlgValuesSupported#
-
Description: A list of the JWS signing algorithms (alg values) supported by the OP for the ID Token to encode the Claims in a JWT
-
Required: No
-
Default value: None
idTokenTokenBindingCnfValuesSupported#
-
Description: Array containing a list of the JWT Confirmation Method member names supported by the OP for Token Binding of ID Tokens. The presence of this parameter indicates that the OpenID Provider supports Token Binding of ID Tokens. If omitted, the default is that the OpenID Provider does not support Token Binding of ID Tokens
-
Required: No
-
Default value: None
imgLocation#
-
Description: The location for image files
-
Required: No
-
Default value: None
includeSidInResponse#
-
Description: Boolean value specifying whether to include sessionId in response
-
Required: No
-
Default value: false
introspectionAccessTokenMustHaveIntrospectionScope#
-
Description: If True, rejects introspection requests if access_token does not have the 'introspection' scope in its authorization header. Comparing to 'uma_protection', 'introspection' scope is not allowed for dynamic registration'
-
Required: No
-
Default value: false
introspectionAccessTokenMustHaveUmaProtectionScope#
-
Description: If True, rejects introspection requests if access_token does not have the uma_protection scope in its authorization header
-
Required: No
-
Default value: false
introspectionEndpoint#
-
Description: Introspection endpoint URL
-
Required: No
-
Default value: None
introspectionResponseScopesBackwardCompatibility#
-
Description: Boolean value specifying introspection response backward compatibility mode
-
Required: No
-
Default value: false
introspectionScriptBackwardCompatibility#
-
Description: Boolean value specifying whether switch off client's introspection scripts (true value) and run all scripts that exists on server. Default value is false
-
Required: No
-
Default value: false
introspectionSkipAuthorization#
-
Description: Specifies if authorization to be skipped for introspection
-
Required: No
-
Default value: None
invalidateSessionCookiesAfterAuthorizationFlow#
-
Description: Boolean value to specify whether to invalidate session_id and consent_session_id cookies right after successful or unsuccessful authorization
-
Required: No
-
Default value: false
issuer#
-
Description: URL using the https scheme that OP asserts as Issuer identifier
-
Required: No
-
Default value: None
jansId#
-
Description: URL for the Inum generator Service
-
Required: No
-
Default value: None
jansOpenIdConnectVersion#
-
Description: OpenID Connect Version
-
Required: No
-
Default value: None
jmsBrokerURISet#
-
Description: JMS Broker URI Set
-
Required: No
-
Default value: None
jmsPassword#
-
Description: JMS Password
-
Required: No
-
Default value: None
jmsUserName#
-
Description: JMS UserName
-
Required: No
-
Default value: None
jsLocation#
-
Description: The location for JavaScript files
-
Required: No
-
Default value: None
jwksAlgorithmsSupported#
-
Description: A list of algorithms that will be used in JWKS endpoint
-
Required: No
-
Default value: None
jwksUri#
-
Description: URL of the OP's JSON Web Key Set (JWK) document. This contains the signing key(s) the RP uses to validate signatures from the OP
-
Required: No
-
Default value: None
keepAuthenticatorAttributesOnAcrChange#
-
Description: Boolean value specifying whether to keep authenticator attributes on ACR change
-
Required: No
-
Default value: false
keyAlgsAllowedForGeneration#
-
Description: List of algorithm allowed to be used for key generation
-
Required: No
-
Default value: None
keyRegenerationEnabled#
-
Description: Boolean value specifying whether to regenerate keys
-
Required: No
-
Default value: None
keyRegenerationInterval#
-
Description: The interval for key regeneration in hours
-
Required: No
-
Default value: None
keySelectionStrategy#
-
Description: Key Selection Strategy : OLDER, NEWER, FIRST
-
Required: No
-
Default value: OLDER
keySignWithSameKeyButDiffAlg#
-
Description: Specifies if signing to be done with same key but apply different algorithms
-
Required: No
-
Default value: None
keyStoreFile#
-
Description: The Key Store File (JKS)
-
Required: No
-
Default value: None
keyStoreSecret#
-
Description: The Key Store password
-
Required: No
-
Default value: None
legacyIdTokenClaims#
-
Description: Choose whether to include claims in ID tokens
-
Required: No
-
Default value: None
logClientIdOnClientAuthentication#
-
Description: Choose if application should log the Client ID on client authentication
-
Required: No
-
Default value: None
logClientNameOnClientAuthentication#
-
Description: Choose if application should log the Client Name on client authentication
-
Required: No
-
Default value: None
loggingLayout#
-
Description: Logging layout used for Jans Authorization Server loggers
-
Required: No
-
Default value: None
loggingLevel#
-
Description: Specify the logging level of loggers
-
Required: No
-
Default value: None
logNotFoundEntityAsError#
-
Description: Boolean value specifying whether to log not_found entity exception as error or as trace. Default value is false (trace).
-
Required: No
-
Default value: None
metricReporterInterval#
-
Description: The interval for metric reporter in seconds
-
Required: No
-
Default value: None
metricReporterKeepDataDays#
-
Description: The days to keep metric reported data
-
Required: No
-
Default value: None
mtlsAuthorizationEndpoint#
-
Description: URL for Mutual TLS (mTLS) Client Authentication and Certificate-Bound Access Tokens (MTLS) Endpoint
-
Required: No
-
Default value: None
mtlsCheckSessionIFrame#
-
Description: URL for Mutual TLS (mTLS) IFrame that supports cross-origin communications for session state information with the RP Client using the HTML5 postMessage API
-
Required: No
-
Default value: None
mtlsClientInfoEndpoint#
-
Description: URL for Mutual TLS (mTLS) Client Info endpoint
-
Required: No
-
Default value: None
mtlsDeviceAuthzEndpoint#
-
Description: Mutual TLS (mTLS) device authorization endpoint URL
-
Required: No
-
Default value: None
mtlsEndSessionEndpoint#
-
Description: URL for Mutual TLS (mTLS) to which an RP can perform a redirect to request that the end user be logged out at the OP
-
Required: No
-
Default value: None
mtlsIdGenerationEndpoint#
-
Description: Mutual TLS (mTLS) ID generation endpoint URL
-
Required: No
-
Default value: None
mtlsIntrospectionEndpoint#
-
Description: Mutual TLS (mTLS) introspection endpoint URL
-
Required: No
-
Default value: None
mtlsJwksUri#
-
Description: URL for Mutual TLS (mTLS) of the OP's JSON Web Key Set (JWK) document
-
Required: No
-
Default value: None
mtlsParEndpoint#
-
Description: Mutual TLS (mTLS) Pushed Authorization Requests(PAR) endpoint URL
-
Required: No
-
Default value: None
mtlsRegistrationEndpoint#
-
Description: Mutual TLS (mTLS) registration endpoint URL
-
Required: No
-
Default value: None
mtlsTokenEndpoint#
-
Description: URL for Mutual TLS (mTLS) Authorization token Endpoint
-
Required: No
-
Default value: None
mtlsTokenRevocationEndpoint#
-
Description: URL for Mutual TLS (mTLS) Authorization token revocation endpoint
-
Required: No
-
Default value: None
mtlsUserInfoEndpoint#
-
Description: Mutual TLS (mTLS) user info endpoint URL
-
Required: No
-
Default value: None
openIdConfigurationEndpoint#
-
Description: URL for the Open ID Connect Configuration Endpoint
-
Required: No
-
Default value: None
openIdDiscoveryEndpoint#
-
Description: Discovery endpoint URL
-
Required: No
-
Default value: None
openidScopeBackwardCompatibility#
-
Description: Set to false to only allow token endpoint request for openid scope with grant type equals to authorization_code, restrict access to userinfo to scope openid and only return id_token if scope contains openid
-
Required: No
-
Default value: false
openidSubAttribute#
-
Description: Specifies which LDAP attribute is used for the subject identifier claim
-
Required: No
-
Default value: None
opPolicyUri#
-
Description: URL that the OpenID Provider provides to the person registering the Client to read about the OP's requirements on how the Relying Party can use the data provided by the OP
-
Required: No
-
Default value: None
opTosUri#
-
Description: URL that the OpenID Provider provides to the person registering the Client to read about OpenID Provider's terms of service
-
Required: No
-
Default value: None
pairwiseCalculationKey#
-
Description: Key to calculate algorithmic pairwise IDs
-
Required: No
-
Default value: None
pairwiseCalculationSalt#
-
Description: Salt to calculate algorithmic pairwise IDs
-
Required: No
-
Default value: None
pairwiseIdType#
-
Description: the pairwise ID type
-
Required: No
-
Default value: None
parEndpoint#
-
Description: URL for Pushed Authorisation Request (PAR) Endpoint
-
Required: No
-
Default value: None
persistIdToken#
-
Description: Specifies whether to persist id_token (otherwise saves into cache)
-
Required: No
-
Default value: false
persistRefreshToken#
-
Description: Specifies whether to persist refresh_token (otherwise saves into cache)
-
Required: No
-
Default value: true
personCustomObjectClassList#
-
Description: This list details LDAP custom object classes for dynamic person enrollment
-
Required: No
-
Default value: None
publicSubjectIdentifierPerClientEnabled#
-
Description: Specifies whether public subject identifier is allowed per client
-
Required: No
-
Default value: false
redirectUrisRegexEnabled#
-
Description: Enable/Disable redirect uris validation using regular expression
-
Required: No
-
Default value: false
refreshTokenExtendLifetimeOnRotation#
-
Description: Boolean value specifying whether to extend refresh tokens on rotation
-
Required: No
-
Default value: false
refreshTokenLifetime#
-
Description: The lifetime of the Refresh Token
-
Required: No
-
Default value: None
registrationEndpoint#
-
Description: Registration endpoint URL
-
Required: No
-
Default value: None
rejectEndSessionIfIdTokenExpired#
-
Description: default value false. If true and id_token is not found in db, request is rejected
-
Required: No
-
Default value: false
rejectJwtWithNoneAlg#
-
Description: Boolean value specifying whether reject JWT requested or validated with algorithm None. Default value is true
-
Required: No
-
Default value: true
removeRefreshTokensForClientOnLogout#
-
Description: Boolean value specifying whether to remove Refresh Tokens on logout. Default value is true
-
Required: No
-
Default value: true
requestObjectEncryptionAlgValuesSupported#
-
Description: A list of the JWE encryption algorithms (alg values) supported by the OP for Request Objects
-
Required: No
-
Default value: None
requestObjectEncryptionEncValuesSupported#
-
Description: A list of the JWE encryption algorithms (enc values) supported by the OP for Request Objects
-
Required: No
-
Default value: None
requestObjectSigningAlgValuesSupported#
-
Description: A list of the JWS signing algorithms (alg values) supported by the OP for Request Objects
-
Required: No
-
Default value: None
requestParameterSupported#
-
Description: Boolean value specifying whether the OP supports use of the request parameter
-
Required: No
-
Default value: None
requestUriBlockList#
-
Description: Block list for requestUri that can come to Authorization Endpoint (e.g. localhost)
-
Required: No
-
Default value: None
requestUriHashVerificationEnabled#
-
Description: Boolean value specifying whether the OP supports use of the request_uri hash verification
-
Required: No
-
Default value: None
requestUriParameterSupported#
-
Description: Boolean value specifying whether the OP supports use of the request_uri parameter
-
Required: No
-
Default value: None
requirePar#
-
Description: Boolean value to indicate of Pushed Authorisation Request(PAR)is required
-
Required: No
-
Default value: false
requirePkce#
-
Description: Boolean value true check for Proof Key for Code Exchange (PKCE)
-
Required: No
-
Default value: false
requireRequestObjectEncryption#
-
Description: Boolean value true encrypts request object
-
Required: No
-
Default value: false
requireRequestUriRegistration#
-
Description: Boolean value specifying whether the OP requires any request_uri values used to be pre-registered using the request_uris registration parameter
-
Required: No
-
Default value: None
responseModesSupported#
-
Description: This list details which OAuth 2.0 response modes are supported by this OP
-
Required: No
-
Default value: None
responseTypesSupported#
-
Description: This list details which OAuth 2.0 response_type values are supported by this OP.
-
Required: No
-
Default value: By default, every combination of code, token and id_token is supported.
returnClientSecretOnRead#
-
Description: Boolean value specifying whether a client_secret is returned on client GET or PUT. Set to true by default which means to return secret
-
Required: No
-
Default value: false
returnDeviceSecretFromAuthzEndpoint#
-
Description:
-
Required: No
-
Default value: false
rotateClientRegistrationAccessTokenOnUsage#
-
Description: Boolean value specifying whether to rotate client registration access token after each usage
-
Required: No
-
Default value: false
rotateDeviceSecret#
-
Description:
-
Required: No
-
Default value: false
sectorIdentifierCacheLifetimeInMinutes#
-
Description: Sector Identifier cache lifetime in minutes
-
Required: No
-
Default value: 1440
serverSessionIdLifetime#
-
Description: Dedicated property to control lifetime of the server side OP session object in seconds. Overrides sessionIdLifetime. By default value is 0, so object lifetime equals sessionIdLifetime (which sets both cookie and object expiration). It can be useful if goal is to keep different values for client cookie and server object
-
Required: No
-
Default value: None
serviceDocumentation#
-
Description: URL of a page containing human-readable information that developers might want or need to know when using the OpenID Provider
-
Required: No
-
Default value: None
sessionIdLifetime#
-
Description: The lifetime of session id in seconds. If 0 or -1 then expiration is not set. session_id cookie expires when browser session ends
-
Required: No
-
Default value: None
sessionIdPersistInCache#
-
Description: Boolean value specifying whether to persist session_id in cache
-
Required: No
-
Default value: false
sessionIdPersistOnPromptNone#
-
Description: Boolean value specifying whether to persist session ID on prompt none
-
Required: No
-
Default value: None
sessionIdRequestParameterEnabled#
-
Description: Boolean value specifying whether to enable session_id HTTP request parameter
-
Required: No
-
Default value: false
sessionIdUnauthenticatedUnusedLifetime#
-
Description: The lifetime for unused unauthenticated session states
-
Required: No
-
Default value: None
sessionIdUnusedLifetime#
-
Description: The lifetime for unused session states
-
Required: No
-
Default value: None
shareSubjectIdBetweenClientsWithSameSectorId#
-
Description: When true, clients with the same Sector ID also share the same Subject ID
-
Required: No
-
Default value: false
skipAuthenticationFilterOptionsMethod#
-
Description: Force Authentication Filtker to process OPTIONS request
-
Required: No
-
Default value: true
skipAuthorizationForOpenIdScopeAndPairwiseId#
-
Description: Choose whether to skip authorization if a client has an OpenId scope and a pairwise ID
-
Required: No
-
Default value: false
skipRefreshTokenDuringRefreshing#
-
Description: Boolean value specifying whether to skip refreshing tokens on refreshing
-
Required: No
-
Default value: false
softwareStatementValidationClaimName#
-
Description: Validation claim name for software statement
-
Required: No
-
Default value: None
softwareStatementValidationType#
-
Description: Validation type used for software statement
-
Required: No
-
Default value: None
spontaneousScopeLifetime#
-
Description: The lifetime of spontaneous scope in seconds
-
Required: No
-
Default value: None
ssaConfiguration#
-
Description: SSA Configuration
-
Required: No
-
Default value: None
statAuthorizationScope#
-
Description: Scope required for Statistical Authorization
-
Required: No
-
Default value: None
staticDecryptionKid#
-
Description: Specifies static decryption Kid
-
Required: No
-
Default value: None
staticKid#
-
Description: Specifies static Kid
-
Required: No
-
Default value: None
statTimerIntervalInSeconds#
-
Description: Statistical data capture time interval
-
Required: No
-
Default value: None
subjectIdentifiersPerClientSupported#
-
Description: A list of the subject identifiers supported per client
-
Required: No
-
Default value: None
subjectTypesSupported#
-
Description: This list details which Subject Identifier types that the OP supports. Valid types include pairwise and public.
-
Required: No
-
Default value: None
tokenEndpoint#
-
Description: The token endpoint URL
-
Required: No
-
Default value: None
tokenEndpointAuthMethodsSupported#
-
Description: A list of Client Authentication methods supported by this Token Endpoint
-
Required: No
-
Default value: None
tokenEndpointAuthSigningAlgValuesSupported#
-
Description: A list of the JWS signing algorithms (alg values) supported by the Token Endpoint for the signature on the JWT used to authenticate the Client at the Token Endpoint for the private_key_jwt and client_secret_jwt authentication methods
-
Required: No
-
Default value: None
tokenRevocationEndpoint#
-
Description: The URL for the access_token or refresh_token revocation endpoint
-
Required: No
-
Default value: None
trustedClientEnabled#
-
Description: Boolean value specifying whether a client is trusted and no authorization is required
-
Required: No
-
Default value: None
trustedSsaIssuers#
-
Description: List of trusted SSA issuers with configuration (e.g. automatically granted scopes).
-
Required: No
-
Default value: None
uiLocalesSupported#
-
Description: This list details the languages and scripts supported for the user interface
-
Required: No
-
Default value: None
umaAddScopesAutomatically#
-
Description: Add UMA scopes automatically if it is not registered yet
-
Required: No
-
Default value: None
umaConfigurationEndpoint#
-
Description: UMA Configuration endpoint URL
-
Required: No
-
Default value: None
umaGrantAccessIfNoPolicies#
-
Description: Specify whether to grant access to resources if there is no any policies associated with scopes
-
Required: No
-
Default value: false
umaPctLifetime#
-
Description: UMA PCT lifetime
-
Required: No
-
Default value: None
umaResourceLifetime#
-
Description: UMA Resource lifetime
-
Required: No
-
Default value: None
umaRestrictResourceToAssociatedClient#
-
Description: Restrict access to resource by associated client
-
Required: No
-
Default value: false
umaRptAsJwt#
-
Description: Issue RPT as JWT or as random string
-
Required: No
-
Default value: false
umaRptLifetime#
-
Description: UMA RPT lifetime
-
Required: No
-
Default value: None
umaTicketLifetime#
-
Description: UMA ticket lifetime
-
Required: No
-
Default value: None
umaValidateClaimToken#
-
Description: Validate claim_token as id_token assuming it is issued by local id
-
Required: No
-
Default value: false
updateClientAccessTime#
-
Description: Choose if application should update oxLastAccessTime/oxLastLogonTime attributes upon client authentication
-
Required: No
-
Default value: None
updateUserLastLogonTime#
-
Description: Choose if application should update oxLastLogonTime attribute upon user authentication
-
Required: No
-
Default value: None
useHighestLevelScriptIfAcrScriptNotFound#
-
Description: Enable/Disable usage of highest level script in case ACR script does not exist
-
Required: No
-
Default value: false
useLocalCache#
-
Description: Cache in local memory cache attributes, scopes, clients and organization entry with expiration 60 seconds
-
Required: No
-
Default value: false
useNestedJwtDuringEncryption#
-
Description: Boolean value specifying whether to use nested Jwt during encryption
-
Required: No
-
Default value: true
userInfoEncryptionAlgValuesSupported#
-
Description: This JSON Array lists which JWS encryption algorithms (alg values) [JWA] can be used by for the UserInfo endpoint to encode the claims in a JWT
-
Required: No
-
Default value: None
userInfoEncryptionEncValuesSupported#
-
Description: This JSON Array lists which JWS encryption algorithms (enc values) [JWA] can be used by for the UserInfo endpoint to encode the claims in a JWT
-
Required: No
-
Default value: None
userInfoEndpoint#
-
Description: The User Info endpoint URL
-
Required: No
-
Default value: None
userInfoSigningAlgValuesSupported#
-
Description: This JSON Array lists which JWS signing algorithms (alg values) [JWA] can be used by for the UserInfo endpoint to encode the claims in a JWT
-
Required: No
-
Default value: None
webKeysStorage#
-
Description: Web Key Storage Type
-
Required: No
-
Default value: None
Created: 2022-07-21
