Install Janssen on EKS

System Requirements

The resources may be set minimally to the below:

• 8-12 GB RAM based on the services deployed
• 8-10 CPU cores based on the services deployed
• 50GB hard-disk

Use the listing below for a detailed estimation of minimum required resources. The table contains the default resources recommendation per service. Depending on the use of each service the resources need may be increased or decreased.

Service	CPU Unit	RAM	Disk Space	Processor Type	Required
Auth server	2.5	2.5GB	N/A	64 Bit	Yes
fido2	0.5	0.5GB	N/A	64 Bit	No
scim	1	1GB	N/A	64 Bit	No
config - job	0.3	0.3GB	N/A	64 Bit	Yes on fresh installs
persistence - job	0.3	0.3GB	N/A	64 Bit	Yes on fresh installs
nginx	1	1GB	N/A	64 Bit	Yes ALB/Istio not used
auth-key-rotation	0.3	0.3GB	N/A	64 Bit	No [Strongly recommended]
config-api	1	1GB	N/A	64 Bit	No
casa	0.5	0.5GB	N/A	64 Bit	No
link	0.5	1GB	N/A	64 Bit	No
saml	0.5	1GB	N/A	64 Bit	No

Releases of images are in style 1.0.0-beta.0, 1.0.0-0

Initial Setup

1. Install aws cli

2. Configure your AWS user account using aws configure command. This makes you able to authenticate before creating the cluster. Note that this user account must have permissions to work with Amazon EKS IAM roles and service linked roles, AWS CloudFormation, and a VPC and related resources

3. Install kubectl

4. Install eksctl

5. Create cluster using eksctl such as the following example:

   eksctl create cluster --name janssen-cluster --nodegroup-name jans-nodes --node-type NODE_TYPE --nodes 2  --managed --region REGION_CODE
   

   You can adjust node-type and nodes number as per your desired cluster size

6. To be able to attach volumes to your pod, you need to install the Amazon EBS CSI driver

7. Install Helm3

8. Create jans namespace where our resources will reside

   kubectl create namespace jans
   

Jans Installation using Helm

1. Install Nginx-Ingress, if you are not using Istio ingress

   helm repo add ingress-nginx https://kubernetes.github.io/ingress-nginx
   helm repo add stable https://charts.helm.sh/stable
   helm repo update
   helm install nginx ingress-nginx/ingress-nginx
   

2. Create a file named override.yaml and add changes as per your desired configuration:

   • FQDN/domain is not registered:

     Get the Loadbalancer address:

     kubectl get svc nginx-ingress-nginx-controller --output jsonpath='{.status.loadBalancer.ingress[0].hostname}'
     

     Add the following yaml snippet to your override.yaml file:

     global:
         isFqdnRegistered: false
     config:
         configmap:
             lbAddr: http:// #Add LB address from previous command
     

   • FQDN/domain is registered:

     Add the following yaml snippet to your override.yaml file:

     global:
         isFqdnRegistered: true
         fqdn: demoexample.jans.io #CHANGE-THIS to the FQDN used for Jans
     config:
         configmap:
             lbAddr: http:// #Add LB address from previous command
     nginx:
       ingress:
           enabled: true
           path: /
           hosts:
           - demoexample.jans.io #CHANGE-THIS to the FQDN used for Jans
           tls:
           - secretName: tls-certificate
             hosts:
             - demoexample.jans.io #CHANGE-THIS to the FQDN used for Jans
     

   • Couchbase for pesistence storage

     Add the following yaml snippet to your override.yaml file:

     global:
       cnPersistenceType: couchbase
     
     config:
       configmap:
         # The prefix of couchbase buckets. This helps with separation in between different environments and allows for the same couchbase cluster to be used by different setups of Janssen.
         cnCouchbaseBucketPrefix: jans
         # -- Couchbase certificate authority string. This must be encoded using base64. This can also be found in your couchbase UI Security > Root Certificate. In mTLS setups this is not required.
         cnCouchbaseCrt: SWFtTm90YVNlcnZpY2VBY2NvdW50Q2hhbmdlTWV0b09uZQo=
         # -- The number of replicas per index created. Please note that the number of index nodes must be one greater than the number of index replicas. That means if your couchbase cluster only has 2 index nodes you cannot place the number of replicas to be higher than 1.
         cnCouchbaseIndexNumReplica: 0
         # -- Couchbase password for the restricted user config.configmap.cnCouchbaseUser that is often used inside the services. The password must contain one digit, one uppercase letter, one lower case letter and one symbol
         cnCouchbasePassword: P@ssw0rd
         # -- The Couchbase super user (admin) username. This user is used during initialization only.
         cnCouchbaseSuperUser: admin
         # -- Couchbase password for the superuser config.configmap.cnCouchbaseSuperUser that is used during the initialization process. The password must contain one digit, one uppercase letter, one lower case letter and one symbol
         cnCouchbaseSuperUserPassword: Test1234#
         # -- Couchbase URL. This should be in FQDN format for either remote or local Couchbase clusters. The address can be an internal address inside the kubernetes cluster
         cnCouchbaseUrl: cbjanssen.default.svc.cluster.local
         # -- Couchbase restricted user
         cnCouchbaseUser: janssen
     

   • PostgreSQL for persistence storage

     In a production environment, a production grade PostgreSQL server should be used such as Amazon RDS

     For testing purposes, you can deploy it on the EKS cluster using the following command:

     helm install my-release --set auth.postgresPassword=Test1234#,auth.database=jans -n jans oci://registry-1.docker.io/bitnamicharts/postgresql
     

     Add the following yaml snippet to your override.yaml file:

     global:
       cnPersistenceType: sql
     config:
       configmap:
         cnSqlDbName: jans
         cnSqlDbPort: 5432
         cnSqlDbDialect: pgsql
         cnSqlDbHost: my-release-postgresql.jans.svc
         cnSqlDbUser: postgres
         cnSqlDbTimezone: UTC
         cnSqldbUserPassword: Test1234#
     

   • MySQL for persistence storage

     In a production environment, a production grade MySQL server should be used such as Amazon RDS

     For testing purposes, you can deploy it on the EKS cluster using the following commands:

     helm install my-release --set auth.rootPassword=Test1234#,auth.database=jans -n jans oci://registry-1.docker.io/bitnamicharts/mysql        
     

     Add the following yaml snippet to your override.yaml file:

     global:
       cnPersistenceType: sql
     config:
       configmap:
         cnSqlDbName: jans
         cnSqlDbPort: 3306
         cnSqlDbDialect: mysql
         cnSqlDbHost: my-release-mysql.jans.svc
         cnSqlDbUser: root
         cnSqlDbTimezone: UTC
         cnSqldbUserPassword: Test1234#
     

     So if your desired configuration has FQDN and MySQL, the final override.yaml file will look something like that:

     global:
       cnPersistenceType: sql
       isFqdnRegistered: true
       fqdn: demoexample.jans.io #CHANGE-THIS to the FQDN used for Jans
     nginx-ingress:
       ingress:
           path: /
           hosts:
           - demoexample.jans.io #CHANGE-THIS to the FQDN used for Jans
           tls:
           - secretName: tls-certificate
             hosts:
             - demoexample.jans.io #CHANGE-THIS to the FQDN used for Jans  
     config:
       configmap:
         lbAddr: http:// #Add LB address from previous command
         cnSqlDbName: jans
         cnSqlDbPort: 3306
         cnSqlDbDialect: mysql
         cnSqlDbHost: my-release-mysql.jans.svc
         cnSqlDbUser: root
         cnSqlDbTimezone: UTC
         cnSqldbUserPassword: Test1234#
     

3. Install Jans

   After finishing all the tweaks to the override.yaml file, we can use it to install jans.

   helm repo add janssen https://docs.jans.io/charts
   helm repo update
   helm install janssen janssen/janssen -n jans -f override.yaml
   

Configure Janssen

You can use the TUI to configure Janssen components. The TUI calls the Config API to perform ad hoc configuration.

---

Last update: 2024-10-15
Created: 2022-05-18